48x10" Fender Rack
Looking to unlock more storage without giving up your truck bed? The STAPLL 48x10" Fender Rack is the original champion of side-of-truck mounting.
STAPLL solves the number one problem with your build: dead space. Our largest, most versatile MOLLE panel mounts low on the fender — below the bed rail and always within reach — so you can carry RotopaX fuel, MAXTRAX and Tred boards, shovels, jacks, and MOLLE pouches without eating into your bed. Ultra-rugged 6061 anodized aluminum and powder-coated steel back an 84-lb load rating, and it all bolts on with zero drilling, fitting virtually every truck on the road, and pairing perfectly with slide in truck campers and cappers.
Every STAPLL Fender Rack is patented, guaranteed to fit your truck, and backed by our limited lifetime warranty.
- Ships in 1–3 business days. Learn more
- Hassle-free returns. Learn more
- Vehicle fit guarantee. Learn more
- Limited lifetime warranty. Learn more
- Easily install yourself, or have it professionally installed. Find a Certified Installer
- Customer support available 7 days/week.
Finish the build.
All accessories →Weight Rating: 84 lbs
Minimum Bed Protrusion: 1.75"
Height on Bed Rail: 0.55"
Product Weight: 32 lbs
MOLLE Panel Dimensions: 48x10"
- 2x STAPLL MTMS™ Fender Rack Brackets
- 48x10" Zinc Plated Powder Coated Steel MOLLE Panel
- Stainless Steel Mounting Hardware
- Paint protection kit - over 10 million miles driven by customers proving STAPLL fender racks will never dent or scratch your truck!
- 2x Rubber Vibration Stabilizers
Why buy from STAPLL? Because we don't just sell racks — we invented the category. STAPLL was founded by two brothers in Durango, Colorado who spent years in the garage solving the same problem you have: how to carry more gear without sacrificing your truck bed. The result is the patented MTMS™ platform — the only no-drill system that turns the dead space beside your bed into organized, accessible storage.
When you buy from STAPLL, you're backed at every step. Every rack is guaranteed to fit your truck or your money back, built from anodized aluminum, powder-coated steel, and stainless hardware to survive the trail, and covered by our lifetime warranty. Real people answer your questions seven days a week, and if your setup is unusual, we'll get on a call and map out the cleanest build with you.
We ride what we build, and we stand behind it for life. That's the STAPLL difference — engineered by people who'd rather be outside, for the ones who feel the same.
Spin it. Study every angle.
Drag to rotate, zoom with the +/− controls, and get a feel for the 48x10″ Fender Rack from every side.
48 INCHES OF PURE CAPABILITY
The 48×10″ is the biggest, most capable surface in the lineup — Because we build our MOLLE Panels out of steel rather than aluminum, our panels are literally some of the most rugged and capable panels on the market. with 1/4-20 & #10 threads press fit across the entire panel.
INDUSTRY LEADING COMPATIBILITY
Our MTMS™ brackets are only .55" thick where they cross over the top of the bed rail. This means we pair with nearly all slide-in campers, and if your capper or camper mounts to the bed rail, then use our Capper Lift & Seal Kit for a weather tight install.
PAINT SAFE BY DESIGN
Every rack ships with our Magnetic Rubber Spacer and removable Paint Protection Film. Together they kill road vibration and protect your truck from scratches or dents — no residue, completely removable.
Real rigs, real footage.
See how owners run their builds. Tag @stapll.co for a chance to be featured.
5,000,000+ miles driven.
Real trucks. Real people. Real builds. Roll with the crew that's redefining how you carry it all.
No drilling. No guesswork.
Bolt-on install with the included universal hardware — most builds are dialed in under an hour. Walk through the steps or grab the full manual before you start.
Fitment & compatibility.
STAPLL is a universal, no-drill platform — guaranteed to fit your truck or your money back. Here's the quick version.
Universal — fits like custom
Our brackets are universal, but the dovetail micro-adjustment design dials each one in to your exact bed rail — so a universal bracket lands like a custom fit. No drilling.
Low-profile intrusion
Reaches just 1.75″ into the bed in Position 1 — clearing most campers — and adjusts deeper when needed.
Paint-safe
Magnetic rubber spacers + PPF mount it scratch-free and remove clean with no residue.
Compatible With
- All full-size & midsize trucks
- Caps & camper shellsGFC, AT Overland, Alu-Cab, Tune & more
- Slide-in truck campers
- Tonneau coversTop-mount & exterior t-slot: Retrax, Roll-N-Lock, Diamondback
- DualliesSingle bracket per side — 6x13 recommended
- Stock Toyota bed-rail channel
- MOLLE, RotopaX, MAXTRAX & Quick Fist gear
Needs a Custom Approach
- Honda RidgelineUnibody bed geometry
- Rivian R1TPowered tonneau & bed design
- Tesla CybertruckOne-of-a-kind rail geometry
- Flush tonneau covers with interior railsOnly when there's no exterior t-slot to mount to
We adapt STAPLL to these all the time — book a quick consult →
Specs & materials.
Frequently asked questions.
The questions we hear most about our racks. Don't see yours? Get in touch — we answer fast.
Contact Us
Always Dialed
Your truck has 48 inches of wasted space. Claim it.
Guaranteed to fit your truck or your money back. Paint-safe, modular, and backed by people who actually build and run this gear.