6x13" Fender Rack
The do-everything size. A 6″ × 13″ MOLLE panel that mounts low on your fender — below the bed rail, always in reach — and carries the gear you need: RotoPax fuel and water, recovery boards, hard cases, all without eating into your bed.
Rated to 50 lb, built from 6061 anodized aluminum and powder-coated steel, and bolted on with zero drilling. Mount it vertical or at 20°.
- Ships in 1–3 business days. Learn more
- Hassle-free returns. Learn more
- Vehicle fit guarantee. Learn more
- Limited lifetime warranty. Learn more
- Easily install yourself, or have it professionally installed. Find a Certified Installer
- Customer support available 7 days/week.
Finish the build.
All accessories →Weight Rating: 50 lbs
Minimum Bed Protrusion: 1.75"
Height on Bed Rail: 0.55"
Panel Dimensions: 6" x 7"
Product Weight: 7.5 lbs
- 1x STAPLL MTMS™ Bracket
- 1x 6x13" MOLLE Panel
- Stainless Steel Mounting Hardware
- Paint protection kit - over 10 million miles driven by customers proving STAPLL fender racks will never dent or scratch your truck!
- 1x Rubber Vibration Stabilizers
Why buy from STAPLL? Because we don't just sell racks — we invented the category. STAPLL was founded by two brothers in Durango, Colorado who spent years in the garage solving the same problem you have: how to carry more gear without sacrificing your truck bed. The result is the patented MTMS™ platform — the only no-drill system that turns the dead space beside your bed into organized, accessible storage.
When you buy from STAPLL, you're backed at every step. Every rack is guaranteed to fit your truck or your money back, built from anodized aluminum, powder-coated steel, and stainless hardware to survive the trail, and covered by our lifetime warranty. Real people answer your questions seven days a week, and if your setup is unusual, we'll get on a call and map out the cleanest build with you.
We ride what we build, and we stand behind it for life. That's the STAPLL difference — engineered by people who'd rather be outside, for the ones who feel the same.
Unlock Your Truck's Full Potential
Our flagship Fender Racks provide customizable organization that maximizes storage without compromising space, empowering professionals and adventurers with efficient, high-quality gear management solutions.
6x7" MOLLE
Our smallest MOLLE - made for mounting virtually any accessory. Use 1 for small hard cases and gas cans, or pair 2 or 3 together for mounting larger items. Our press fit 1/4-20 threads make mounting easy. Shown here in a 20 degree position.
Slide Plate
The Slide Plate allows you to easily install and uninstall your accessories without having to remove the Brace and Thread Plate. It also allows for micro adjustments, no matter the size and shape of your fenders, you'll get a snug custom fit every time.
Thread Plate
The foundation of our Fender Racks, and the heart of our Advanced MTMS™ Platform. Our Thread Plate creates stability, adjustability, and a plethora of untapped accessories and modularity.
Brace
The Brace is the main contact point between your Thread Plate and your bed rail. Paired with either our Track Hardware Kit or Clamp Hardware Kit, the Brace can be mounted on 99.9% of trucks on the market. Both Track and Clamp Hardware Kits are included.
Magnetic Rubber Spacer
A breakthrough for making Fender Racks possible. The Magnetic Rubber Spacer securely mounts between your truck fender and Fender Rack MOLLE Panels to create a safe and solid mount below your bed rail. The spacer can also be applied with PPF Adhesive for aluminum body trucks. (PPF and Adhesive included)
Spin it. Study every angle.
Drag to rotate, zoom with the +/− controls, and get a feel for the 6x13″ Fender Rack from every side.
5,000,000+ miles driven.
Real trucks. Real people. Real builds. Roll with the crew that's redefining how you carry it all.
No drilling. No guesswork.
Bolt-on install with the included universal hardware — most builds are dialed in under an hour. Walk through the steps or grab the full manual before you start.
Fitment & compatibility.
STAPLL is a universal, no-drill platform — guaranteed to fit your truck or your money back. Here's the quick version.
Universal — fits like custom
Our brackets are universal, but the dovetail micro-adjustment design dials each one in to your exact bed rail — so a universal bracket lands like a custom fit. No drilling.
Low-profile intrusion
Reaches just 1.75″ into the bed in Position 1 — clearing most campers — and adjusts deeper when needed.
Paint-safe
Magnetic rubber spacers + PPF mount it scratch-free and remove clean with no residue.
Compatible With
- All full-size & midsize trucks
- Caps & camper shellsGFC, AT Overland, Alu-Cab, Tune & more
- Slide-in truck campers
- Tonneau coversTop-mount & exterior t-slot: Retrax, Roll-N-Lock, Diamondback
- DualliesSingle bracket per side — 6x13 recommended
- Stock Toyota bed-rail channel
- MOLLE, RotopaX, MAXTRAX & Quick Fist gear
Needs a Custom Approach
- Honda RidgelineUnibody bed geometry
- Rivian R1TPowered tonneau & bed design
- Tesla CybertruckOne-of-a-kind rail geometry
- Flush tonneau covers with interior railsOnly when there's no exterior t-slot to mount to
We adapt STAPLL to these all the time — book a quick consult →
Specs & materials.
Already own a hard case? Mount it.
Our racks aren't a closed system. The panel is MOLLE with press-fit threads, so the case sitting in your garage right now — Pelican, third-party, whatever you've already invested in — bolts straight to a pair of STAPLL racks and rides on the outside of your bed.
- You'll need the Case Mount Hardware Kit — the bolts and backing that fasten a case through the MOLLE panel.
- Spans a pair of racks — that's what gives a long case a level, solid mount.
- Frees your bed. The case moves out of the bed and onto the fender, where it's actually in reach.
Real rigs, real footage.
See how owners run their builds. Tag @stapll.co for a chance to be featured.
Frequently asked questions.
The questions we hear most about our racks. Don't see yours? Get in touch — we answer fast.
Contact Us
This is our standard single-bracket configuration—an excellent choice for customers wanting to add custom accessories to their trucks without committing to cross bars or cappers. The 6in x 7in MOLLE works great with a single 1 or 2-Gallon RotopaX. You can use a single bracket or align 3 to 4 on each side of your truck, depending on your specific needs and creativity.
The 6in x 13in MOLLE Panel offers a perfect balance of size and versatility, designed to mount larger items securely and efficiently. Tailored design ideal for mounting storage boxes or Rotopax containers lower on the fender, below the bed rail—ideal for pairing with truck-bed campers and sled decks for snowmobiles.
Possibly the most functional MOLLE panel on the market. This set-up offers the flexibility to mount any accessory you can imagine, with built-in compatibility for RotopaX 1, 2, and 4-gallon tanks, Maxtrax and Tred recovery boards, and press-fit 1/4-20 & #10 nuts for quick-attach clamps for shovels or jacks. With four mounting positions, it fits virtually all trucks and integrates seamlessly with other truck bed accessories.
The 56L Fender Case Kit comes with 2x 6x7" Fender Racks, table chains, and all the stainless steel mounting hardware, plus our weather tight 56L Fender Case. Easy-access storage that works with cappers, truck campers, tonneau covers, and bed racks. Whether you’re a contractor, adventurer, or weekend warrior, this system adapts to your needs and grows with you.
This is our standard single-bracket configuration—an excellent choice for customers wanting to add custom accessories to their trucks without committing to cross bars or cappers. The 6in x 7in MOLLE works great with a single 1 or 2-Gallon RotopaX. You can use a single bracket or align 3 to 4 on each side of your truck, depending on your specific needs and creativity.
The 6in x 13in MOLLE Panel offers a perfect balance of size and versatility, designed to mount larger items securely and efficiently. Tailored design ideal for mounting storage boxes or Rotopax containers lower on the fender, below the bed rail—ideal for pairing with truck-bed campers and sled decks for snowmobiles.
Possibly the most functional MOLLE panel on the market. This set-up offers the flexibility to mount any accessory you can imagine, with built-in compatibility for RotopaX 1, 2, and 4-gallon tanks, Maxtrax and Tred recovery boards, and press-fit 1/4-20 & #10 nuts for quick-attach clamps for shovels or jacks. With four mounting positions, it fits virtually all trucks and integrates seamlessly with other truck bed accessories.
The 56L Fender Case Kit comes with 2x 6x7" Fender Racks, table chains, and all the stainless steel mounting hardware, plus our weather tight 56L Fender Case. Easy-access storage that works with cappers, truck campers, tonneau covers, and bed racks. Whether you’re a contractor, adventurer, or weekend warrior, this system adapts to your needs and grows with you.
6x13" PERFECT FOR EXTERIOR GRAY TANKS
Mount 2, 4, or 5 gallon water containers and instantly create an exterior gray tank. Eliminating mud puddles and 5 gallon buckets at camp.
RotopaX 5 Gallon Mounted on STAPLL 6x13" Fender Rack
Always Dialed
Every fender has dead space. Claim yours.
Innovative racking that turns an unused corner of your truck into mounted, locked-down gear. Guaranteed to fit or your money back.